October 25, 2023

How Many Screws are Needed per Grab Bar?

A general rule of thumb is to use at least two screws per flange on a grab bar. This means that for a standard grab bar with two flanges, you’ll need a total of four screws. However, there are a few factors to consider:

• Grab bar design: Some grab bars have three holes per flange, offering flexibility in installation.
• Wall material: If you’re installing the grab bar into studs, you might use more screws for added security.
• Weight capacity: For higher weight capacities, using more screws might be recommended.

Always refer to the specific instructions provided with your grab bar. They will give you the most accurate information for your particular product. Professional installation is also highly recommended for grab bars to ensure they are installed properly and offer the highest level of safety and security for users.

If you need help finding a local professional installer, just fill out this form: Grab Bar Installation Request Form

Do grab bars come with all of the screws needed for installation?

Generally, yes, grab bars come with the necessary screws for installation. However, it’s always a good idea to double-check before starting your project.

• Check the packaging: Most grab bars will include screws and any other hardware needed.
• Read the product description: Online retailers often specify what’s included.
• Contact the manufacturer: If you still have doubts, reach out to the manufacturer for clarification.

Even if the grab bar includes screws, you might need additional hardware depending on your wall type (for example: anchors for drywall, drill bits, etc.)

Each grab bar on GrabBars.com comes with six 2-inch stainless steel screws. It is up to you and based on your personal preference if you want to use 2 or 3 of these screws per flange; however, it is recommended to use all of the screws in your grab bar installation for maximum security.

If you need additional anchoring devices, take a look here: Grab Bar Anchoring Devices

How do the screws fit in the grab bar flange?

The screws typically fit through pre-drilled holes in the grab bar’s flange. These holes are designed to align with the pilot holes you drill into the wall.

1. Flange: This is the flat part of the grab bar that attaches to the wall.
2. Screw Holes: The flange has pre-drilled holes for the screws. 
3. Installation: You align the flange with the wall, insert the screws through the holes, and secure them into the wall anchors or studs.

                                     

All grab bars on GrabBars.com have a concealed screw design for a more decorative look. Each grab bar comes with premium flange mounts to facilitate installation, 3 set screws which allows pre-mounting to the wall before attaching the grab bar (a game changer!), twist-on flange covers and mounting hardware. This includes a twist-on flange cover with a flange featuring multiple anchoring points to facilitate installation.

Take a look at the wide variety of grab bar styles here: Grab Bars

Take a look at the following unboxing videos, which show the stainless steel screws that are needed for installation:

• “Standard Grab Bar – Stainless Steel”
• “Designer Grab Bar – Brushed Stainless”

If you have any additional questions about grab bars or installation, live chat with us at GrabBars.com, email us at [email protected] or call us at 704-800-4629 and we’ll be happy to help you out!